We manufacture different machines for scale and dust filtration and collection and special filters to remove sludge from phosphating bath

=>CAD Design

  Filter Model F500
Filter model F 500


Our Technical Department is at Your Service
to suggest the best solution for Your application.

TECHNICAL DATA
MODEL F 18 FA 30 FA 40
Type of filtering elements cartridge sleeves (textile) sleeves
Suction points 2 5 10
No. of filtering elements 3 40 50
Air flow speed 0.55 m/min 1.66 m/min 2 m/min
Filtering surface 20 m2 30 m2 40 m2
Number of values 3 4 5
Compressed air required   5 - 6 bar (dry air)  
Air consumption for cartridges cleaning 1 - 3 Nm3/h 5 - 10 Nm3/h 6 - 10 Nm3/h
Max powder concentration in the vent hood less than 20 mg/m3 less than 10 mg/m3 less than 10 mg/m3
Installation indoor indoor indoor
Discharge device ... motorised rotating valve ...

Other models are avaiable to meet costomer's requirements and specifications.

Continuous cleaning of phosphating bath

TECHNICAL DATA model F 500
Technology Rotating vacuumfiltration
Material Stainless steel
Type of filtration Automatic by means of vacuum pump
Capacity of filtration From 5 to 10 hours/week are enought to clean a bath of 10000 litres
Working temperature 75° maximum
No. of filtering segments 8
Drum rotation speed 0.2 - 1.2 turns/minute
Total installed power 8.2 HP
Cloth washing tube air detaching panel
carriage    5 Nm3/h
pressure    0.2 Kg/cm3
Filter cleaning water pressure    2 - 3 Kg/m2

With reserve of variations due to introduction of technical improvement.