A full range of pointin machines, with two or
four rollers,
is avaiable to cover a wide range of wire and rod diameters.
A special material is used for the construction of the rollers.
| TECHNICAL DATA | ||||||
| MODELS | PC/O/L | PC/1/L | PC/2/L | PC/4/L | PC/6/L | PC/8/L |
| Application | ... | ... | High carbon |
Steel |
... | ... |
| Range of diameters | a 0.7 - 2.5 | a 1.0 - 5.40 b 15.5 - 5.5 c 1.3 - 6.00 |
a 1.0 - 6.8 b 1.7 - 8.2 c 1.5 - 9.0 |
a 1.5 - 10.0 b 2.5 - 12.5 c 3.0 - 14.0 |
a 3.0 - 16.0 b 6.0 - 16.0 c 7.5 - 23.0 |
a 13.5 - 28.0 |
| Motor power (HP) | manual | 2 | 4 | 5.5 | 10 | 15 |
| No. of rolls | 2 | 2 | 2 | - | - | - |
| Net weight Kg | 100 | 240 | 300 | 450 | 1020 | 1150 |
| Overall dimension mm H W L |
300 300 1000 |
520 350 1100 |
650 150 110 |
800 450 1100 |
1350 500 1300 |
1350 500 1300 |
| with reserve of variations due to introduction of technical improvements | ||||||
Motor and electrical panel, with thermal overload relay, is
palced inside the frame
Small models supplied with two wheels-trolley
Our Technical
Department is at Your Service
to suggest the best solution for Your application.