In-line shot blasting machines

In-line shot blasting technology can be applied
to all materials replacing acid pickling

TECHNICAL DATA
MODEL	TR1	PAN 2X10	PAN 3X30	PAN 4X20 N
Rod size mm	5.50 - 6.50	2 - 22	5.50 - 20	5.50 - 20
Material	...	high and low carbon	steel and alloys	...
No. of turbines	1	2	3	4
Motor power (HP/each turbine)	25	10	30	20
Distances from rod and blades	60	250	300	200
Turbine diameter mm	350	380	380	380
Number of blades	8	6	6	8
Projection speed mt/s	60-90	76	76	76
Cleaning grade	SA 2.5-SA 3	SA 2.5-SA 3	SA 2.5-SA 3	SA 2.5-SA 3
Rod surface condition	Type A	Type A	Type A	Type A
Maximum rod speed m/min (low carbon steel) diam. 5.50 mm 8.00 mm 11.00 mm 15.00 mm	150 - - -	60 40 30 10	180 140 90 70	250 180 100 80
Wire Line	1000 mm	1000 mm	1000 mm	1000 mm
Shot blasting media	dry metal shots(HR50)	dry metal shots(HR50)	dry metal shots(HR50)	dry metal shots(HR50)
Abrasive recovery media and reconditioning system		automatic (by air flitr	ation and dry filtration)
Dust suction and elimination	Automatic	Automatic	Automatic	Automatic
Shot flow at full power	300 Kg/min	250 Kg/min	1100 g/min	1200 Kg/min
Shot consumption at full power	1.2 Kg/h	1.6 Kg/h	7.2 Kg/h	8 Kg/h
Compressed air required	6-10 Nmc/h at 6 bar	6-10 Nmc/h at 6 bar	6-10 Nmc/h at 6 bar	6-10 Nmc/h at 6 bar
Fan capacity for dust extraction	3000 m3/h	3000 m3/h	7000 m3/h	5200 m3/h
PLC	yes	option	option	option
Turbine speed control (by frequency inverter)	yes	option	option	option
Avaiable motors power (HP)	5-10-15-20-25	5-10-15-20	5-10-15-20-25	10-20-25-30-40
With reserve of variations due to introduction of technical improvements.

Our Technical Department is at Your Service
to study the best solution for Your specific Application.